Series 20 max 90kg
Designed for lightweight applications such as interior doors and cupboards or overhead runway systems and partitions etc.
Industrial Series 20 sliding system can be mounted both Face and Soffit fitting.
With its vast range of hangers and components, the Series 20 sliding door gear kit offers a smooth, flexible solution for straight, folding and curved configurations.
Series 20 straight sliding door systems are suitable for timber or metal doors with a maximum panel weight up to 70kg (using two 2 wheel hangers per door), or 90kg (using two 4 wheel hangers per door). Generally two hangers are used on each door panel.
A third or fourth hanger can be used to increase door weight capacity. eg. using three 20-23 hangers would allow a door panel weighing up to 135kg to be used.
Series 20 straight sliding door systems are suitable for timber or metal doors with a maximum panel weight up to 70kg (using two 2 wheel hangers per door), or 90kg (using two 4 wheel hangers per door). Generally two hangers are used on each door panel.
A third or fourth hanger can be used to increase door weight capacity. eg. using three 20-23 hangers would allow a door panel weighing up to 135kg to be used.
Series 20 straight sliding systems are suitable for timber or metal doors with a maximum panel weight up to 70kg.
When using upper track support brackets they should be fixed at 600 - 1000mm spacing.
Steel track is pre-drilled for soffit fixing at 600mm centres and may be fixed directly to the substrate. Aluminium track is not pre-drilled and will require support brackets.
Please call our technical sales
team to discuss your requirements - 01280 822288
Using the Industrial centre folding door system allows you to stack your doors to the centre of the partition taking up excess space on either side.
